NEW! Faster Search Option
Loading
Reclaimed wood
From a secret location, the red boards was a 2x8 joist, cleaned up nicely. Those oak pieces on the saw are from a couple of rafters, also cleaned up. All of this was from an old garage that was torn down. Plenty more to "clean up" in the pile...
give me a picture, I'll give you a finished piece
Navigation
Recent Discussions
Lift mechanism needed 7 replies
Old plane vs new 8 replies
That "special" tool 6 replies
Buy American made 1 reply
Re: Holzman and Vega lathes 3 replies
Inca/Delta 20" Bandsaws 4 replies
Cast Iron Clamp 4 replies
Building a Floor Clook 1 reply
Music Boxes 1 reply
Star of David 3 replies
Hand Tool Grinding Angle Setups 11 replies
More Rust Hunter 1 reply
Lie-Nielsen Router Plane 3 replies
Regarding sharpening 2 replies
looking for lignum vitae mallet 28 replies
Best saw for dovetails 4 replies
Half lap joints 2 replies
Rolltop desk top 3 replies
Large Pins, small tails 4 replies
Adhesive to use for laminating MDF? 8 replies
Seasonal movement of Cherry 3 replies
Boxwood 5 replies
More on cutting thin cuts 4 replies
Can't see any videos 2 replies
Forced log-offs . . . again? 4 replies
Fix: Private Messaging Spam 13 replies
Get in touch with author 1 reply



Good Find (post #169181, reply #1 of 5)
Nice stuff you have - I got lucky today at a house sale - a 15 in. wide x 7/8 x 12 foot long ash board for $ 5.00. You'll find me in the garage when the others are tearing the house apart.
SA
more boards and (post #169181, reply #2 of 5)
more questions. Oak or Ash, or? These are from some rafters I got from a garage tear down (FREE!). These were a full 2" thick by 4-3/4" wide. I just cleaned up three of them tonight. I still have a truck load to go through. There seems to be a couple 6 x 6s under the pile, as well.
Question, Oak, or Ash, or ?????
give me a picture, I'll give you a finished piece
close up photo (post #169181, reply #3 of 5)
Generally speaking, Oak will show medulary rays on all surfaces, Ash will not.
A close sharp close up photo of the face grain would be helpful when seeking to ID a species. Not trying to be negative here but rather helpful. I would urge you that if you can, obtain a copy of Bruce Hoadley's book "Identifying Wood". It has a boatload of info and great photos to help you identify these treasures you keep unearthing.
We can get you close with good photos on this forum but we can't get exact like you can looking at end grain with magnification. It will open up a whole new field of info to you.
Rich
The Professional Termite
Thinking Ash then (post #169181, reply #4 of 5)
as there are no ray flacks showing in the face grain. LOt of tannic acid though, every nail hole is black. At least there were no bugs in these. Can't wait to see what else is in that pile.....
give me a picture, I'll give you a finished piece
a few more looks (post #169181, reply #5 of 5)
at some old rafters stock I've resawn
give me a picture, I'll give you a finished piece