RELIANT Dust Collector Model 820+items for whole shop system

RELIANT Dust Collector Model 820

LOCATION: Connecticut Shoreline on Connecticut River

Dust collector is barely used; has been in heated and dry building.

Powered by 2-horsepower 3450RPM electric motor; 115/230-volts, single phase.  5-inch intake opening1185 CFM [it will take the chrome off a trailer hitch]; machine weight 143 lbs.

Stock bags replaced with General International 2-micron felted filter bags [http://www.general.ca/site_general/accessories/dust/10-115e.html].  Stock bags included.

Includes the following:

1. Veritas Large Cyclone Lid [05J30.02] with two 4-inch male-to-male connecters.  The large cyclone lids are designed to fit on any round container with a top diameter between 19" and 23-1/2". The registration ledges on the inside of the lid fit on standard trash cans from 19" to 20-1/2" in diameter. The 23-1/2" diameter outer ledge fits on a 55 gallon drum.  This lid on a large drum [preferable metal as the dust collector will collapse a plastic drum] collects chips and dust.  The bags then do not get encrusted with dust or spew dust into your shop.
http://www.leevalley.com/US/wood/page.as...

2. 4-inch PVC piping in the following lengths: 75-; 72-; 66-;61-; 52-; 45-; 40-; and 27-inches.  Ends of piping have been expanded so flexible tubing and connectors will fit inside them.

3. 4-inch black flexible tubing in the following lengths: 116-; 52-; 46-; 45- [2]; and 35-inches.

4.  The following connectors: 3 wyes; 4 90-degree sweeps; 3 blast gates; and one floor sweep.



$550. 

Trades [partial/total] for drum sander or spindle sander or belt sander [not hand tool], or 6- to 10-inch jointer considered; 0r lathe.

Pickup only, or something mutual if there is a trade.